Wallbox E-series 7.4Kw
Up to 74 kW load power (charge 2x faster)
Easily configurable charging power: 7.4 kW
Integrated DC fault current sensor
Suitable for all electric cars
Product dimensions (W x H x D) ....... 240 x 495 x 163 mm
Weight ... 4.8 kg
Installation variations ............... Wall mounting or pole installation (stainless steel)
Rated current ........... Configurable values: 10A, 13A, 16A or 20A
Charging power ......... 7.4 kW
Voltage ... 230 V
Communication ........ in acc. with IEC 61851-1, mode 3
Type of plug ........ Type 2 (according to ICE 62196-2)
Standards and guidelines ............. Directives: 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE, 2011/65 / EU | European standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, E DIN EN 61439-7, EN 61000-6-1, EN 61000-6-3, EN 50581: 2012 (RoHS-RL) RFID: EN 301 489-1, EN 301 489-3, EN
Degree of protection .......... IP54 waterproof, suitable for outdoor use
Storage and operating temperature (without direct sunlight), relative humidity permissible at 16 A: -25 to + 50, max. 95%
at 32 A: -25 to + 40, max. 95%
DC fault current detection ......... yes
With the KeBA KeContact P30 e-series recharging station, you can charge up to 2 times faster than in a standard household socket. Check out our summary of charging time to see how fast your car's electric battery can be fully recharged, and how quickly you can get back on the road.
Continue to load after a crash
The automatic recovery function automatically restarts the charging process in case of failure. This means that you can reliably charge your electric car even after a power failure, thermal overload or residual current cut, so you can tackle your next journey with a full battery and no need for intermediate charging.
High quality workmanship, easy to use
Whether indoor or outdoor, electrical parts enjoy reliable protection through high-quality materials such as weather-resistant and heavy-duty plastics. The KEBA KeContact P30 C Series recharging station is easy to operate and always indicates the current operating status through multicolored LEDs
Integrated fault current sensor
The KEBA KeContact P30 e-series recharging station comes with a DC fault current sensor as standard. All you have to do in the installation is to install a low cost A type RCD on the upstream protection device.
Configurable charging power
To avoid system overload and blown fuses, the charging station's charging power must match the fuse's upstream protection and installation. Unlike other manufacturers, the KEBA charging station allows easy adjustment of the charging power through dip switches, for values between 2.3 and 4.6 kW.
Load different electric cars
If your electric car has a type 1 or type 2 plug connection, with the correct charging cable, you can charge any type of electric cable.