Tower B-series 22Kw
Type2 socket or 6mts cable + type2 + RFID plug
Up to 22kW of charge power (charge 10x faster)
Easily configurable charging power: 2.3 - 22kW
Integrated DC fault current sensor
RFID access protection (can be activated)
Suitable for all electric cars
Product dimensions (W x H x D) ....... 240 x 495 x 163 mm
Weight ... 4.8 kg
Installation variations ............... Wall mounting or pole installation (stainless steel)
Rated current ........... Configurable values: 10A, 13A, 16A, 20A 25A 0u 32A
Charging power ......... 2.3kW, 22kW
Voltage ... 3 X 230V / 400V
Communication ........ in acc. with IEC 61851-1, mode 3
Type of plug ........ Type 2 (according to ICE 62196-2)
Standards and guidelines ............. Directives: 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE, 2011/65 / EU | European standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, E DIN EN 61439-7, EN 61000-6-1, EN 61000-6-3, EN 50581: 2012 (RoHS-RL) RFID: EN 301 489-1, EN 301 489-3, EN
Degree of protection .......... IP54 waterproof, suitable for outdoor use
Storage and operating temperature (without direct sunlight), relative humidity permissible at 16 A: -25 to + 50, max. 95%
at 32 A: -25 to + 40, max. 95%
DC fault current detection ......... yes
With the KEBA KeContact P30 B Series recharging station, you can charge up to 10 times faster than in a standard household outlet. Check out our summary of charging time to see how fast your car's electric battery can be fully recharged, and how quickly you can get back on the road.
High quality wallbox, easy to use
Whether indoors or outdoors, electrical parts enjoy reliable protection through high-quality materials such as weather-resistant and heavy-duty plastics. The KEBA KeContact P30 C Series recharging station is easy to operate and always indicates the current operational status through multicolored LEDs
Configurable charging power
To prevent overloading of the system and blown fuses, the charging power of the charging station must correspond to the upstream protection and fuse installation. In contrast to other manufacturers, the KEBA charging station allows easy adjustment of charging power via dip switches, ranging from 2.3 to 22 kW.
Continue to charge after a crash
The automatic recovery function automatically restarts the charging process in case of failure. This means that you can charge your electric car reliably even after a power failure, thermal overload or residual current cut, so you can face your next journey with a full battery and no need for intermediate charging.
Integrated fault current sensor
The KEPA KeContact P30 series B charging station comes with a DC fault current sensor as standard. All you need to do at the installation is to install a low cost Type A RCD on the upstream protection device.
Your charging station can only be used by users whose RFID card details are saved to the charging station. If an OCPP backend is used, new RFID cards can be programmed in the backend. Without a backend installation, RFID cards can be activated directly at the charging station with the help of the supplied master card. Electric car drivers use an RFID charging card to unlock the charging station and start the charging process. The station is delivered with RFID disabled.